Free plans for woodworking projects

Frustrated that You have to pay for Woodworking Plans?
Building a wood project usually starts with finding a woodworking plan. Sure, plans can help, but they assume a lot from readers - often leaving out critical steps in the building process that more experienced builders no longer need.

GET your "Free plans for woodworking projects" NOW
free plans for woodworking, free plans for woodworking projects, free plans woodworking, free woodworking plans and projects, free woodworking plans projects, free woodworking project plans, free woodworking projects and plans, free woodworking projects plans, woodworking free plans, woodworking plans for free, woodworking plans free, woodworking project plans free, woodworking projects free plans

Tips for solving problems in your workshop

Woodworkers who build cabinets or furniture always seem to be in need of just the right piece of hardware for one of their projects—hardware that meets a special need. Chances are good that the item you're looking for exists—but where? The products shown here represent but a few of the thousands of special-purpose hardware items available today.

It pays to know your hardware options, both at your local hardware store or home center and through mail order. For your convenience, on the next page, we list a group of mail-order firms (including The Woodworkers' Store, where we bought the items shown below) that offer selections of cabinet hardware. We think you'll find purchasing their inexpensive catalogs a good investment— and good reading, too.

Quick-Insert Hidden Hinges
Completely invisible with the door shut, and unob¬trusive when its open, these hinges install easily and quickly. Just drill matching holes in the door and frame, insert the hinge into those holes, drive a single screw through each side into the wood, and you're done!

Plastic Drawer Dividers
Ideal for compartmentalizing cabinet drawers, these nifty items fasten to the inside of the drawer sides with nails. The ones shown accept dividers from V to V thick, and come in two heights—2" and 3'r.

Vinyl Panel Retainer
With frame-and-panel doors, you've got to secure the panel some¬how. While you can cut thin strips of wood to do the job, this purposeful product sure makes the going a lot easier. You can cut it easily with a knife and miter it with standard tools. The type shown snaps into a groovi cut into the frame.

Counterbalanced Lid Hinge
This surface-mount, dual- purpose hardware item makes great sense for projects with lids, such as stereo cabinets and the like. Just position the lid and hinge, mark the location of the screw holes, drill starter holes, and mount the hinge. It's a snap!

Magnetic Touch Latch
Looking for a sleek- looking set of cabinets without door pulls? This catch holds the door closed until you press on the face of the door. To close the door, push the door shut and the latch holds it.

Plastic Magnetic Catch
Especially suited for small doors, this catch mounts in a hole bored into the frame; the metal strike attaches to the door. The catch shown is available in brown and white plastic.

Ornamental Surface- Mount Hinge
Designed for flush inset doors, this hinge doesn't require mortising. The leaves of the hinge align to ensure just the right space between the door and frame.

Out-of-Sight Shelf Supports
An interesting option to the more standard shelf support clips, these wire supports fit. into small holes drilled in cabinet end and divider panels. Shelves with grooves cut into their edges slide onto the supports. To change shelf positions, just move the wire supports up or down.

Easy-Does-It Glass Door Hinges
Hinging glass cabinet doors can be a hassle, but not with this temper-saving piece of hardware. To install a pair of these hinges, drill holes n the top and bottom of the cabinet, fit plastic inserts into the holes, slip the hinges into the inserts, slide the glass door into the hinges, and secure the door by tightening the screws in the hinge.

Slip-On Glass Door Strike
This simple-to-install strike is the perfect match for the glass door hinges shown here. (You can also use it with the touch latch described above.) Foam rubber pads hold the strike securely in place.

Mail Order Hardware Suppliers
The companies listed below represent a good cross section of the firms selling cabinet and furniture hardware (and in many cases other items) by mail. We'll tell you about others as we run onto them.

Tips for your shop - part 2

Applying finishes smoothly
Uniform coats are the exception rather than the rule with some finishes. To apply lacquers and Polyurethane finishes smoothly, fill a pan with hot tap water, and set the can of finish in it for a few minutes before use. Raising the material's temperature by only a few degrees—and choosing a poly- urethane foam brush as an applicator—will help avoid an uneven look when the finish dries.

Handy tape dispenser
In many shops, finding the right tape at the right time can be a problem. Once located, it's often covered with sawdust and wood shavings. To keep various types and sizes of tape in one handy location, use scrap wood and a piece of dowel or broomstick to make a tape dispenser. An old hacksaw blade reinforced with a wooden strip makes a good cutter.

Rx for difficult gluing
Getting the right amount of glue into hard-to-reach spots is a messy operation. To inject glue with "pin-point" accuracy, use a medical syringe with an 18- or 22-gauge needle. Keep the apparatus from seizing up after use by flushing the syringe and needle with warm water and storing them in a closed container of water.

Working with dowels
A dowel's shape is both a blessing—it makes the material a remarkably versatile woodwork¬ing resource—and a curse: work-ing a cylindrical object can be frustrating. This handy jig, a scrap 2X4 with a hole the diam¬eter of the dowel bored through it, makes dadoing, trimming to length, or decreasing the diameter of a dowel a safe and simple procedure on your radial-arm or table saw. Drive a finish nail through the 2X4 and just far enough into the dowel to prevent it from turning.

Paint brush maintenance
Your paint brush is clean but not dry. What's a good way to remove excess water or paint thinner? Hold the brush between your palms and spin it back and forth vigorously. Centrifugal force will spin away excess moisture and fluff out the bristles—which helps prevent the brush from drying into an unmanageable lump.

Sharpening with a drill press
Putting the proper bevel on chisels and plane blades isn't an easy freehand skill. Use a drill press and drum-sander attachment with appropriate grit sleeves to grind blades. Clamp the blade or chisel in a drill-press vise with the blade perpendicular to the table and parallel to the quill. Position and secure the vise to the table with a C-clamp. With the sander turning slowly, raise and lower the quill to sharpen the blade. To move the blade closer to the drum, tap the vise with a mallet. Work slowly to prevent excessive heat buildup.

Tips for your shop - part 1

No one knows everything about woodworking, but, with experi¬ence, we all run into better, safer, faster, or easier ways to do things.

Raising dents and scratches
Even the smallest dents and scratches mar the appearance of otherwise successful woodworking projects. To remove small dents or raise minor scratches in wood surfaces, wet and then cover the problem area with a damp cloth. Using a household iron on a dry setting, apply heat to the cloth for 15-second intervals. Take care to avoid scorching the wood.

Drill-bit straightener
Small-diameter drill bits are easily bent during normal use. To straighten a bent bit, chuck it into your drill and, while running the drill at full speed, insert the drill point into a piece of scrap wood. Apply slight sideways pressure to the drill to return the bit to its proper shape. When you release the pressure, the bit will continue to run true.

Avoiding nail splits
Even though you hammer carefully, your nail occasionally splits the wood. Blunt the tip of the nail by tapping it with your hammer to let the nail cut its way into the wood rather than part the material. Or chuck a proper-sized nail into a drill (you may need to cut off the nail head), pre-drill holes, and then ham¬mer and set nails.

First-aid for dull saber-saw blades
Halfway through a "must-do" project, you discover that the blade on your saber saw is dull, and you don't have a spare. Touch up the blade with a triangular file. Place the blade in a vise with teeth pointing up (don't pinch them). File away from you, giving each tooth two or three quick strokes. Rotate the blade 180° and file the other side.

Repairing torn grain
No matter how skillful you are with a plane, the grain patterns of some wood species make it almost impossible to avoid raising and tearing the grain. To fix tears, apply several drops of cyanoacrylate adhesive (the "super" variety made for wood and leather) to the affected area. Sand the spot immediately. Sanding presses the raised wood down, generates heat to set the glue, and produces fine sawdust that mixes with the glue to create an invisible and permanent repair. —Dean Case, Nevada City, Calif.

World-champion finishing jig
Applying finish to more than one side of an object is an awkward, messy chore. A steel swivel made to support a boxer's punching bag makes an ideal shop aid for holding objects that need finishing. Attach the swivel to a secure overhead support, screw an eye-hook into the object to be finished, and hang the piece on the swivel. The workpiece — not the woodworker—does all the moving. (A plant hanger that swivels is an inexpensive alternative for working with light objects.)

-to be continued-

The old hand ways - THE CARPENTER

How can one person make a building that will endure for centu­ries when another's work falls and turns to compost long before he does? Take some time to study the skeleton of a well-framed old barn. (It must have been well-framed. It's still standing, isn't it?) You will see the truth of what a 1745 book of trades said of the carpenter, that "Strength is the chief of his study."

Study the barn's frame, its vertical posts, horizontal beams, and diag­onal braces. Older than Stone- henge, this "post-and-beam" con­struction is the essence of the En­glish building tradition. Indeed, the first English settlers in the New World built houses and barns that were not much different from the ancient stone monuments they had left behind: simple frames consisting of posts set into the ground with beams spanning their tops. They were wooden houses, but hardly the work of carpenters. It's no wonder there aren't any of them left.

If you think of a building as a human body, then the old-time car­penter's job is to make the bones and the skeleton—the strong frame to which the joiners and roofers later apply the protective skin. Good carpentry makes strong frames by exploiting the wood's strength in three dimensions: the size of the building's individual tim­bers, the connections between these pieces, and the design of the frame as a whole. When all these aspects of the building work together, the carpenter has earned his pay.


Take a wooden pencil and push in from its ends to make it shorter. No go. Now bend it and it snaps in half. The point is that it is easy to make a strong post but harder to make a strong, yet lightweight beam. You need a way to size tim­bers so that they are as strong as they need to be, but no heavier than they must be. Fortunately you can turn to a simple guideline for help: The strength of a rectangular beam varies directly with changes in width. With changes in depth, however, the difference in strength is squared.

Imagine that you have to support a load with a beam measuring 2 inches wide and 4 inches deep. A 4 by 4 would be twice as heavy and twice as strong. A 2 by 8, however, twice as deep as the origi­nal timber, would also be twice as heavy, but would have four times the strength. A 2 by 12 would be nine times as strong, and only three times as heavy. The more a car­penter knows about the strength of his timbers, the more confidently he can approach the limits of the material.


You often hear that old buildings are held together entirely by wooden pegs. True, the pegs are there, but the strength of the build­ings is not in their pegs, but in their joints. These mortise-and-tenon joints interlock the timbers so that they sit solidly within one another. It is a rare building from which you couldn't remove every peg and have it stand as strong as before. (Try this with the nails in a modern structure.)

Braced Frames

Although a post planted deeply in the ground won't fall over, it will invite destruction by termites and rot. Once you protect a building by placing it up on foundations, however, you must stiffen it by adding the strength of triangles to the rectangular frame.

Diagonal braces strengthen the building in several ways. Ideally, a post is a perfectly vertical column that is compressed but not bent. If the post does start to bow, it can snap relatively easily. Braces con­nected to the post prevent the bend from getting started. And, by blocking the closure of the right angles created between posts and beams, braces also prevent the col­lapse of a building under wind.

Split oak baskets

Making billets

"In summer, the green, felled log must be split within ten days, or the ends will dry out and check," our woodworker says. "In winter, though, splitting can be done as long as four months after the tree has been dropped."

From Billet to Split

Our woodworker begins the process of turning billets into splits by taking off the bark with a drawknife at the shav­ing horse.

Removing the bark

Next, the individual billets are shaped to desired form, also on the shaving horse. "The object," ex­plains our woodworker, "is to taper each end of the billet so that when strips come off, they'll be wide in the center for

Splitting the billet with a drawknife the bottom of the basket, and they'll taper toward their ends to form the basket's ribs.

Our woodworker does this shaping with the drawknife, turning the billet to work it from both ends. He uses the same method to form weavers, the long, narrow, and straight pieces that tie the ribs together. He de­pends on a well-developed eye to maintain widths.

Traditionally, from the shaving horse, billets would move to the workbench to be split into weavers or ribs with a drawknife and a simple jackknife. Standing a billet on end, the basket maker would split it with the drawknife down its length parallel to the annual growth rings. He would keep splitting until the pieces could no longer be reduced by that method, then switch to the jackknife. Our woodworker knows the old way, too.

Placing the blade of the jackknife in the grain, our woodworker begins the split. When the knife has separated enough of the wood to grasp by.

Pulling the split by hand

hand, it's put aside, and the pulling begins.

Hand-pulling becomes increas­ingly delicate as the strips near their final thickness. "If the split runs off to one side, you pull toward the other side," he says while demonstrating.

Final hand-pulling

That's the traditional way, but in the high production basket shop, the traditional takes too long. In­stead of hand-pulling, our woodworker has fit­ted a cooper's spokeshave with a planer blade to shave weavers and ribs from the billets clamped on a shaving horse.

Shaving a split with a spokeshave

It's still hand work, and the results aren't always uniform. Ac­cording to our woodworker, "anything done by hand is going to have some varia­tion on it."

With no gauge to rely on, the shaving technique requires a prac­ticed eye. "The thickness of the split is solely a product of how hard the spokeshave is pushed down and the strength of the maker's pull," our woodworker says.

He makes his splits "down the tree" with the spokeshave and then works the tool back and forth fol­lowing the grain and keeping it to the center. "The strips must be constant in their thickness, with ribs thicker and weavers thinner. If they're thick on the ends and thin in the middle, the basket will have a weakness," our woodworker explains.

The splits come off the shaving horse moist and pliable, ready for weaving. They'll stay that way for 3 to 4 days in normal weather, but hot days dry them out in an hour. That's when our woodworker wets the splits down with a sprinkling can or gives them a good soaking.

Two Types of Baskets in 50 Styles

To this basket maker, the world of split-oak baskets is divided into two parts—designs woven over a form and those built completely free­hand. Yarger makes both, in 50 different styles. Starting below, we'll follow him through the steps in making a formed, rectangular basket that's a popular seller.

Split oak baskets - Laying Out, Halving, and Splitting the Log

After felling the tree with a cut as close to the ground as possible, and freeing I he desired section from the rest of the trunk, Ykamato studies the wood for halving and splitting.

"I look for knots when I lay it out on the ground," he says. "If there is a knot, I make the first split close to it, since that section will be lost anyway. I split down from the top of the log to the base. That way, if there's a knot in there some¬where, the split has a tendency to cut right through it. But I've found that if you run into a knot when splitting from bottom to top, the split usually runs around the knot and maybe even slabs off."

Using a maul and steel wedge, the basket maker splits the log in half. Then he moves one third of the way down each section, where he drives in the maul to quarter the log. This way, our woodworker knows he's right in the run of the grain, since the true grain can't be seen from the ends of a section.

After the log has been quartered, he crosscuts it into about 3-foot sections, then slabs off the heart- wood, which, if it is relatively knot-free, he uses later for handles, ribs, and accent strips. Then, Yarger splits the quartered sections into eighths, called billets.